Decorative Concrete in Kennewick, WA
Finishes That Change the Room, Not Just the Floor
Decorative concrete in Kennewick covers a wide range of finishes and the useful conversation is about which ones your slab can actually deliver. That is not a sales distinction. A flake or quartz broadcast system builds a texture over the concrete and will hide a slab that has patches, old repairs, and colour variation. A stain or a polish does the opposite. It works with what is already there, which means every previous repair, every oil stain, and every trowel mark becomes part of the finished floor. On a garage slab from the 1970s that has seen forty years of use, one of those approaches produces a floor people are pleased with and the other produces a permanent record of the slab's history. Broadcast systems also solve a practical problem here. A smooth coated floor in a Kennewick garage collects the fine dust that blows through the Columbia Basin, and dust on a smooth resin surface is slippery underfoot. A flake or quartz broadcast gives a texture that stays walkable. We always put a sample panel down on your own concrete before a full floor is committed, because a chip blend on a sample board and the same blend over your slab are not the same colour.
The sequence is assessment, sample panel, grinding, repair, base coat, broadcast, and clear topcoat. Where a polish or stain is the goal, the grinding sequence changes entirely and takes longer, because the finish is produced by the grinding rather than by anything applied afterward. You receive the sample panel decision in writing, the system build, and the maintenance regime for the finish you chose, since a polished floor and a broadcast floor are cleaned differently.
What's Included in our Decorative Concrete service?
Flake and Quartz Broadcast
Builds texture and slip resistance while hiding minor slab imperfection.
Stained and Polished Concrete
Works with the existing slab rather than covering it, so condition governs the result.
Sample Panel on Your Floor
Shows the finish on your actual concrete before the full floor is committed.
Proudly serving Kennewick, Richland, Pasco, West Richland, Finley and Burbank and Benton City for 9+ years.
Comprehensive Epoxy Flooring Services in Kennewick
Tailored to Your Needs
Ten services, from a single-bay garage coating to a warehouse slab or a winery crush pad. Each one starts the same way, by reading the concrete and establishing what it actually needs, then choosing the system that matches the traffic, the exposure, and the schedule the building runs on.
A commercial coating specification set by traffic, chemical exposure, and the hours the building runs.
Repair work that first establishes why the existing coating failed, then fixes that cause.
Industrial floor systems specified around wheel loading, joint movement, and washdown exposure.
Decorative finishes chosen against slab condition, because the concrete limits what is achievable.
A garage system specified against hot-tire pickup, UV exposure, and slab moisture.
A poured metallic finish where slab flatness and installer technique set the outcome.
A fast-curing topcoat that holds colour under UV and returns a floor to service quickly.
A new wearing surface bonded to a slab that is structurally sound but visually finished.
A below-grade floor system chosen after moisture testing, because vapor pressure governs it.
A washdown-rated floor system with coved detailing and slip resistance set to a wet kitchen.
Where We Work Across Benton and Franklin Counties
Concrete floor coatings for Kennewick homes, shops, and commercial buildings
Kennewick is the base, and the crew works out to Richland, Pasco, West Richland, Finley, Burbank, and Benton City. Permit paths, electric utilities, and housing stock all change across those lines, so each community gets its own page rather than a shared one.
Frequently Asked Questions
Epoxy Flooring can be complex, and we’re here to provide answers to common questions. Here are some frequently asked questions from our clients.
Frequently Asked Questions about epoxy flooring Kennewick WA
How much does epoxy flooring cost in Kennewick, WA?
There is no single price for an epoxy floor in Kennewick. Cost follows the square footage, the condition of the slab underneath, how much crack and joint repair the concrete needs first, and which coating system the room actually calls for. A clean two-car garage and a warehouse slab with spalling and old coating residue are not comparable jobs. We measure and test the floor, then price the scope we found.
Can epoxy floors be installed year-round in Kennewick?
Yes, with the caveat that the slab temperature governs the schedule, not the calendar. Kennewick winters run cold enough that an unheated garage slab can sit below the cure range for the coating, which either slows the cure or stops it. Summer heat does the opposite and shortens working time. We check slab temperature and dew point on the day, and in cold months we either heat the space or move to a system rated for lower temperatures.
How do I maintain an epoxy floor?
Sweep or dust-mop grit off regularly, because the Columbia Basin sends a lot of fine dust indoors and grit under a tire or a pallet jack is what actually scratches a coating. Wash with a neutral-pH cleaner rather than a degreaser. Avoid dragging steel across the surface, and put a mat under any vehicle that gets driven in hot. A garage floor treated this way stays serviceable for many years before it needs a recoat.
What is the best floor coating for a Kennewick garage?
For most Kennewick garages the answer is a ground and primed slab with an epoxy build coat and a polyaspartic or polyurea topcoat. That combination handles hot-tire pickup, resists the UV that comes through an open overhead door, and cures fast enough to return the space to service quickly. A single-coat epoxy is cheaper and will do in a low-traffic bay. Which one suits your garage depends on what you park and how much sun the door lets in.
What are the types of epoxy flooring?
The common systems are solid-color epoxy, flake or chip broadcast systems, quartz broadcast, metallic epoxy, and self-leveling epoxy. Above those sit polyaspartic and polyurea topcoats and, for wet commercial rooms, urethane cement. They differ in thickness, slip resistance, chemical resistance, and how much of the slab beneath they hide. The room decides which one fits, not the sample board.
How long does epoxy flooring last in a garage?
A properly prepared garage floor coating commonly lasts many years before it needs attention, and the deciding factor is almost always the preparation rather than the product. Coatings that fail early usually failed at the bond line because the slab was etched rather than ground, or because moisture was still moving up through the concrete. Traffic, hot tires, and how much direct sun the floor takes then set the pace of ordinary wear.
Frequently Asked Questions about Decorative Concrete
How much does decorative concrete cost?
It varies more than any other service we offer, because the finishes are not comparable to each other. A flake broadcast over a sound slab and a multi-step polish on concrete needing repair sit far apart. Square footage, the finish chosen, and the state of the slab set the number. We put a sample panel down and price the finish you actually choose.
Can decorative concrete go over an existing garage slab?
In most cases yes. Which finishes are available depends on the slab's condition. Broadcast systems are forgiving of patching and colour variation because they build a new surface. Stains and polishes reveal everything that is already in the concrete, so on an older slab with repairs we will show you a sample panel before you commit.
Is a decorative floor slippery?
A smooth resin floor with fine dust on it is slippery, which matters here because the Columbia Basin puts a lot of dust into buildings. A flake or quartz broadcast gives a texture that stays walkable, and the topcoat can be specified with additional slip resistance where the floor gets wet. We ask what the room is for before recommending a finish.
How long does a decorative concrete floor last?
The base system and preparation set the life, the same as any other coating, and the decorative layer sits within that build rather than on top of it. Broadcast systems wear well because the aggregate takes the abrasion. Polished concrete lasts as long as the slab does but needs periodic re-burnishing to keep the sheen.
Choose a Finish for Your Kennewick Floor
What Our Satisfied Clients Have to Say About Kennewick Epoxy Flooring
We pride ourselves on delivering great results and experiences for each client. Hear directly from home and business owners who’ve trusted us with their Epoxy Flooring needs.
The Trusted Epoxy Flooring Expert Near You
Ready to hear more about expert services at Kennewick Epoxy Flooring?
Contact us today to receive a detailed, no-obligation quote.
Serving Canyon Lakes, Southridge, Creekstone, Hansen Park, West Highlands, Metaline & Greater Kennewick
Mon–Fri 8AM–5PM | Sat 9AM–2PM | Sun Closed
